Buyleads from India
Buyleads from Spain
Buyleads from Brazil
Buyleads from Canada
Buyleads from Australia
Buyleads from Singapore
Buyleads from New Zealand
Buyleads from United States

Post Trade Leads

Click here to:

electrodes
Steel pipes

Posted on

25 Oct 2010

Country

Saudi Arabia

We require marine equipment, electrodes, steel pipes.

Contact Person : Yasser

We are looking for galvanized pipe 1/2"*sch 40*5800, 25 ton.

Yours Sincerely,

Contact :
Daisy   

Please take the price from your principals,

SA 789 UNS No. 31260 Seamless Tubes(Duplex tube)
Size - OD 19.05 X 1.65 WT X 10,000 mm Long - 1200 Nos
Tube shall be heat treated according to specification.
Purging of tube during heat treatment shall be done.
2 nos. sample for micro structure after heat treatment shall be tested.
Sample in heat treated zone & non-heat treated zone shall de tested.
Hydro test of the tubes is mandatory
Material will be used for manufacturing heat exchanger & end use will for nitrogen recycle].

Please give your best price on per piece and PER MT basi on CIF Nhava Sheva port basis.

This is a firm enquiry.

Regrds,

Contact :
Hitesh Sheth   

We require Sharp brand welding electrodes.

Contact Person : Bereket Semere   

We are looking for carbon steel pipes :
1 û Scope Of Work:
Contractor shall supply welded pipes according, but not limited to the following conditions: All ERW welded pipes should be manufactured according to API 5L sour services. 1-1 Product specification level: according to API PSL 2 latest edition. 1-2 Product analysis: one pipe per heat of steel shall be analyzed; the carbon equivalent shall not exceed 0.43 %. And chemical composition according to API 5L. PSL 2. 1-3 All pipes should be new and unused. 1-4 Hydrogen induced cracking (HIC) test, sulfide stress cracking SSC test, should be performed and material shall be accepted. 1-5 Material: semi-killed steel or silicon killed steel. 1-6 Welding seam processes: without filler metal. 1-7 Welded Pipes shall have single longitudinal seam only. 1-8 Seam weld: each pipe seam shall be 100% NDT inspected according to API 5L. 1-9 Pipe materials shall be resistance to sour service environment and comply with NACE Standard MR.01-75 latest rev, and recommendations and related ASME publication. 1-10Hydrostatic test: required acc. to Para (5.4). 1-11 The hardness at any point of pipes shall not exceed the 22HRC. As defined in ASTM Standard A370, mechanical testing of steel products. 1-12 Tolerance of dimensions, wall thickness weight, and Out of Roundness shall be according to API 5L. 1-13 Length of pipes shall be double random. Length Tolerance between (9 û 12) m. 95% Of quantity as minimum, shall have Length between 11 and 12 m. 1-14 Heat treatment process: each pipe shall be heat treated for seam weld and entire HAZ of pipe according to API 5L requirements. 1-15 All pipes beveled end according to API 5L. 1-16 Repair by welding, see Para (6.1). 1-17All pipe ends should be protected by rubber or steel cups. 1-18 Each pipe shall have external three layers polyethylene shop coated (Epoxy Primer with minimum thickness 500 micron, adhesion layer, black polyethylene layer with minimum thickness 2.5 mm). (Density of polyethylene shall be at least 950 kg/m3), the material used should be resistance to (abrasion, hydrocarbons, salt and tap water, acids and alkalis, alcohol, fungi and bacteria) Insulation resistance 20000 (ohm/m¦), Operating temperature range (-10 ˜ 70) ˚c. 1-19The pipes surfaces shall be : * Clean and free from dust, oil and grease prior blasting. * Surfaces shall be appearance to meet SA 2.5. The surface profile shall be 40 - 75 microns (peak to trough). 1-20 The pipe ends exterior shall be coated with an anti-corrosive varnish or lacquer and shall be bare from (black polyethylene coating layer) over a length of 140 mm ¦ 10 mm, the polyethylene coating layer shall be chamfered to an angle 15-20 deg. 1-21 Seam marking: Each pipe shall have the marking of seam place by white arrow paint on outside surface at the two ends of each pipe.


Contact :
Dr. Eng. Adli Dirhali   

Required Standard: A 106 or API 5L.

Size:
34mmx3.38mmx6m.
42mmx3.56mmx6m
51mmx3.50mmx6m.
76mmx5.16mmx6m.
90mmx5.49mmx6m.
114mmx6.02mmx6m.
140mmx6.55mmx6m.
219mmx8.18mmx6m


Regards
Ngoc Lien   

Dear Sirs,

Please give us your best prices with the make and other terms and conditions. Your quotation must reach us by 24th - september.

Item Dia x Wall x Length St.Grade Qty Wt./Ton Pipe :
101.6, X, 4, X, 8200, S 355 JR, 95, 7.471, pipe, 101.6, X, 5, X, 6000, S 355 JR, 64, 4.570, pipe, 101.6, X, 5, X, 7500, S 355 JR, 42, 3.749, pipe, 101.6, X, 6.3, X, 12000, S 355 JR, 95, 16.872, pipe, 114.3, X, 6.3, X, 9000, S 355 JR, 8, 1.210, pipe, 114.3, X, 8, X, 9000, S 355 JR, 125, 23.594, pipe, 139.7, X, 5, X, 8000, S 355 JR, 20, 2.656, pipe, 168.3, X, 10, X, 12000, S 355 JR, 16, 7.296, pipe, 139.7, X, 16, X, 12000, S 355 JR, 9, 7.544, pipe, 273, X, 35, X, 10200, S 355 JR, 30, 62.608, pipe, 406.4, X, 20, X, 6500, S 355 JR, 1, 1.242, pipe, 42.4, X, 3.2, X, 12000, S 355 JR, 12, 0.445, pipe, 48.3, X, 4, X, 12000, S 355 JR, 57, 2.989, pipe, 60.3, X, 3.2, X, 12000, S 355 JR, 12, 0.649, pipe, 76.1, X, 3.2, X, 12000, S 355 JR, 6, 0.407, pipe, 88.9, X, 4, X, 12000, S 355 JR, 32, 3.218, pipe, 88.9, X, 5, X, 12000, S 355 JR, 43, 5.315, pipe, 88.9, X, 6.3, X, 12000, S 355 JR, 79, 12.134, ST, 160, X, 10, X, 12000, S 355 JR, 4, 2.165, 166.134

Contact :
Hitesh Sheth   

We are importing hot galvanized pipes.

Contact Person : Dhawadhawa   

Please send us your quote for immediate delivery / ex-stock for ASTM A-106 seamless carbon steel pipes in sizes 1 inch to 6 inches in thickness from 4mm to 8mm prime or secondary CIF Nhava Sheva, Mumbai port, India. Total quantity 50 tons to 100 tons.


Contact :
Samaresh Pal   

Interested in importing the following materials:

Prime quality - item - weight (mt)

Hr coil (ss400, spht1)
1.0~2.0mm x 1250mm x c 5, 000
H/i beam / angle 1, 500
Sheet piling 1, 000
Steel pipe 1, 000
Total 8, 500

Contact : Annie   

Dear Sirs

We are dealing in steel products, such as:

1) seamless pipes
2) flanges, elbows, etc.
3) steel sheets, bars.
4) steel wires
5) bolts & nuts

We are intrested in getting informations aboute manfucturers of these products as soon as possible.

Looking to hear from you.

Thanks And Best Regards.

Nezar Al-Nadi
Assistant Manager   

We are importers of welding electrodes.

Regards
Vinnet   

I want to buy welding electrodes AWS E6013 2.5X 300mm 3.2X350mm for long time business which has ISO ,CNAB ,CSQA certificates. Titanium all position welding titanium type electrodes with ferrous powder in the coating. It has high welding efficiency, smooth appearance, stable arc and negligible, spatter loss, packing : 2.5kg and 5kg box + plastic cover=20 kg carton good packing for welding hulls, vehicles, machinery,and buildings, send C&F Karachi port price and send all information.

Regards
Rahman Gul   

I want to have long time business good quality for welding electrodes. If you are in this position and have titanium . Use all propose all position welding titanium type electrodes , polarity a/c- d/c, corrent 50-90 with ferrous powder in the cating. Have cnab and csaq, iso certificates, has high efficiency, smooth appear Nance, stable arc and negligible, machinery and building. Also which brand do you have? please send us your policy and all so the best c&f Karachi price and packing small box with good plastic caver send all information by email.

Rahman Gul   

Please give us your introduction. Then, we'll soon sent an offer after seeing the profile.

Syed Javed Shah   

We are interested in different steel pipes for different purposes. Please inform us if you produce pipes according standards API (Do you produce pipes according Russian standards?)
1. pipe casing and sockets for them
2. pump-compressor pipes and sockets for them (API Spec 5CT)
3. drill boring pipes (API 5D)
4. steel weldless (solid drawn) hot-deformed pipes and cold-deformed pipes (API Spec 5L)
5. steel welded for trunking gas-oil transmission pipelines (API Spec
5L) (made with strips).

Contact :
Annie   

Dear Sir/Madam,

We are interested in HR, CR, HDGU, GA, PPGA, PPGI, CRGO, pipes and tubes and steel relevant machinery, especially secondary steel: slit coils, baby coils, strips, sheet. We are looking for secondary HR (equal or less than 2.0mm in thickness), CR (less than 0.5mm in thickness) secondary GI (z80-180).

Ms.Tram   

We are interested in HR, CR, HDGI, GA, PPGA, PPGI,CRGO, pipes and tubes...and steel relevant machinery, especially secondary steel:slit coils, baby coils, strips, sheet. We are looking for secondary HR(equal or less than 2.0mm in thickness), CR(less than 0.5mm in thickness) secondary GI(Z80-180).

Contact : Ms.Tram   

Looking for ss filler rods, welding electrodes all grade, welding machines, inverter type.

R.K.Duraiswamy   

Looking for reputed Taiwan electrode manufacturers.

Regards
M.Kaleem   

We require pipes, butt weld, socket wed pipe fittings.

Mahes.P